OFS-needle shut-off nozzle type NV
By the controlled closing and opening the flow canal, the cycle time can be reduced and a more exactly injection process is possible.
The OFS-needle shut-off nozzle is actuated pneumatically or hydraulically by a flanged cylinder. This nozzle can also be controlled by a linkage of the machine.
Because the controlled closing of the flow path, shorter cycle times are possible and there are less material loss. The OFS-needle shut-off nozzle is suitable for all thermoplastic materials. The size of the nozzle depends on the injection rate, the material and the screw diameter.
Product inquiry 
Technical data sheet
View the embedded image gallery online at:
https://www.ofs-filtersysteme.de/en/products/shut-off-nozzles/needle-shut-off-nozzle/type-nv.html#sigProIdf14177a20f
https://www.ofs-filtersysteme.de/en/products/shut-off-nozzles/needle-shut-off-nozzle/type-nv.html#sigProIdf14177a20f
Further information on the shut-off nozzle type NV
Your benefit
shorter cycle times- possible dosing during lift of aggregate.
- higher process security at the injection moulding.
- compact and robust construction of the nozzle.
- all parts are exchangeable.
- all spare parts are available.
- easy mounting and disassembly.
- Bedienerfreundlich.
- easy handling.
Dimensions
Here you will find a detailed table of dimensions for the OFS-needle shut-off nozzle type NV.
You can use the graphic on the right to assign the data.
| datas and standard dimensions (mm) | NVI | NVII | NVIII | |
| appr. screw dia | mm | up to approx. 35 | 30-80 | from approx. 70 |
| max. injection pressure | bar | 2.500 | 2.500 | 2.500 |
| length | A2 | 205 | 210 | 225 |
| nozzlehead dia | C1 | 30 | 30 | 40 |
| nozzlebase dia | C2 | 60 | 70 | 80 |
| hexagon nozzlehead | SW1 | 32 | 41 | 46 |
| hexagon nozzlebase | SW2 | 60 | 60 | 80 |
OFS
